ASROCK H670M PRO RS - Page 27

English
23
H670M Pro RS
RGB LED Header
(4-pin RGB_LED1)
(see p.1, No. 7)
is RGB header is used to con-
nect RGB LED extension cable
which allow users to choose from
various LED lighting eects.
Caution: Never install the
RGB LED cable in the wrong
orientation; otherwise, the cable
may be damaged.
*Please refer to page 34 for further
instructions on this header.
Addressable LED
Headers
(3-pin ADDR_LED1)
(see p.1, No. 8)
(3-pin ADDR_LED2)
(see p.1, No. 26)
(3-pin ADDR_LED3)
(see p.1, No. 25)
ese headers are used to connect
Addressable LED extension ca-
bles which allow users to choose
from various LED lighting
eects.
Caution: Never install the
Addressable LED cable in the
wrong orientation; otherwise,
the cable may be damaged.
*Please refer to page 35 for
further instructions on this
header.
VOUT
DO_ADDR
GND
1