ASROCK P67 EXTREME6 - Page 41

41
The Installation Guide of Front USB 3.0 Panel
Intall the Front USB 3.0 Panel into the 2.5”
drive bay of the chassis.
Step 3
Step 4
The Front USB 3.0 Panel is ready to use.
Plug the Front USB 3.0 cable into the USB 3.0
header (USB3_2_3) on the motherboard.
Step 5
Step 6
Screw the Front USB 3.0 Panel to the
drive bay with six chassis screws.
Prepare the bundled Front USB 3.0 Panel, four
HDD screws, and six chassis screws.
Step 1
Step 2
Screw the 2.5” HDD/SSD to the Front
USB 3.0 Panel with four HDD screws.
The Installation Guide of Rear USB 3.0 Bracket
Put the USB 3.0 cable and the rear USB 3.0
bracket together.
Unscrew the two screws from the Front USB 3.0
Panel.
Step 1
Step 2
Put the rear USB 3.0 bracket into the chassis.
Screw the two screws into the rear USB 3.0
bracket.
Step 3
Step 4