66
Read to Precharge (tRTP)
Use this item to change Read to Precharge (tRTP) Auto/Manual setting.
The default is [Auto].
Four Activate Window (tFAW)
Use this item to change Four Activate Window (tFAW) Auto/Manual set-
ting. The default is [Auto].
Memory Power Down Mode
Use this item to adjust DDR power down mode. Configuration options:
[Auto], [Slow] and [Fast]. The default value is [Auto].
Power Saving Mode
Use this to enable or disable Power Saving Mode. The default value is
[Disabled].
CPU Core Voltage
Use this to select CPU Core Voltage. Confi guration options: [Auto],
[Offset Mode] and [Fixed Mode]. The default value is [Auto].
CPU Load-Line Calibration
CPU Load-Line Calibration helps prevent CPU voltage droop when the
system is under heavy load. Confi guration options: [Level 1] to [Level 5].
The default value is [Level 5].
DRAM Voltage
Use this to select DRAM Voltage. Confi guration options: [Auto], [1.200V]
to [1.800V]. The default value is [Auto].
PCH Voltage
Use this to select PCH Voltage. Confi guration options: [Auto], [0.780V] to
[1.646V]. The default value is [Auto].
CPU PLL Voltage
Use this to select CPU PLL Voltage. Confi guration options: [Auto],
[1.586V] to [2.349V]. The default value is [Auto].
VTT Voltage
Use this to select VTT Voltage. Confi guration options: [Auto], [0.661V] to
[1.870V]. The default value is [Auto].
VCCSA Voltage
Use this to select VCCSA Voltage. Confi guration options: [Auto], [0.925V]
to [1.200V]. The default value is [Auto].
User Default
In this option, you are allowed to load and save three user defaults
according to your own requirements.
To Next Page
Loading...
