ASROCK Super Alloy B660M PG Riptide - M.2 Installation Guide

English
23
B660M PG Riptide
1
SPI_DQ3
SPI_PWR
SPI_DQ2
SPI_CS0
Dummy
CLK
SPI_MISO
SPI_MOSI
GND
SPI_TPM_CS#
RST#
RSMRST#
TPM_PIRQ
SPI TPM Header
(13-pin SPI_TPM_J1)
(see p.1, No. 17)
is connector supports SPI Trusted
Platform Module (TPM) system,
which can securely store keys, digital
certicates, passwords, and data.
A TPM system also helps enhance
network security, protects digital
identities, and ensures platform
integrity.
RGB LED Header
(4-pin RGB_LED1)
(see p.1, No. 25)
is RGB LED header is used to con-
nect RGB LED
extension cable which allow
users to choose from various LED
lighting eects.
Caution: Never install the RGB
LED cable in the wrong orientation;
otherwise, the cable may be dam-
aged.
*Please refer to page 33 for further
instructions on this header.
Addressable LED Headers
(3-pin ADDR_LED1)
(see p.1, No. 24)
(3-pin ADDR_LED2)
(see p.1, No. 7)
(3-pin ADDR_LED3)
(see p.1, No. 8)
ese three headers are used to con-
nect Addressable LED
extension cables which allow
users to choose from various LED
lighting eects.
Caution: Never install the Address-
able LED cable in the wrong orien-
tation; otherwise, the cable may be
damaged.
*Please refer to page 34 for
further instructions on this header.
+12V GRB
1
VOUT
DO_ADDR
GND
1
VOUT
DO_ADDR
GND
1