ASROCK X300TM-ITX - Audio, LAN, I;O, and Storage Interfaces

English
6
•
Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and HBR
(High Bit Rate Audio) with HDMI 2.1 Port (Compliant HDMI
monitor is required)
•
Supports LVDS with max. resolution up to 1920x1080 @ 60Hz
•
Supports HDCP 2.3 with HDMI 2.1 Port
* Picasso supports HDCP 2.2 with HDMI 2.0 Port
Audio
•
Realtek ALC233 Audio Codec
•
1 x Headphone Jack
•
1 x MIC-In
LAN
•
PCIE x1 Gigabit LAN 10/100/1000 Mb/s
•
Realtek RTL8111GR
•
Supports Wake-On-LAN
•
Supports Lightning/ESD Protection
•
Supports Energy Ecient Ethernet 802.3az
•
Supports PXE
I/O
•
1 x DC Jack (Compatible with the 19V power adapter)
•
1 x Serial Port: COM
•
2 x HDMI Ports: HDMI1 (Rear), HDMI2 (Internal)
•
3 x USB 3.2 Gen1 Type-A Ports (Supports ESD Protection)
•
1 x USB 3.2 Gen1 Type-C (co-layout USB 3.2 Gen1 Type-A)
Port (Supports ESD Protection)
•
1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED
LED)
•
HD Audio Jacks: Line out / Microphone
Storage
•
1 x SATA3 6.0 Gb/s Connector, supports NCQ, AHCI and Hot
Plug
•
1 x Ultra M.2 Socket, supports M Key type 2260/2280 M.2
SATA3 6.0 Gb/s module and M.2 PCI Express module up to
Gen3 x4 (32 Gb/s)
* Supports NVMe SSD as boot disks
* (Optional) 2 x SATA3 6.0 Gb/s Connectors, 1 x Ultra M.2
Socket, supports M.2 PCI Express module up to Gen3 x4 (32 Gb/s)
Connector
•
1 x Chassis Intrusion Header
•
1 x Panel Voltage Selection Header
•
1 x Backlight Inverter Voltage Selection Header