ASROCK Z170 OC FORMULA - Page 77

71
English
Z170 OC Formula
CPU Load-Line Calibration
CPU Load-Line Calibration helps prevent CPU voltage droop when the system is
under heavy load.
CPU Vcore Pwm Switching Frequency
Congure the PWM Switching Frequency for CPU Vcore.
CPU Vcore Voltage Turn on All Phase
Enable the CPU Vcore Voltage Turn On All Phase or set it to [Auto].
Current Sensor Report
Adjust Isense Gain to decrease/increase current report.
Over Voltage & Current Protection
Enable/disable over voltage & current protection.
Vcore Per Phase OCP
Enable/disable the OCP (over current protection) of each phase for Vcore.
CPU SVID Support
Enable/disable CPU SVID support.
DRAM Voltage
Use this to congure DRAM Voltage. e default value is [Auto].
DRAM Activating Power Supply
Congure the voltage for the DRAM Activating Power Supply.
PCH +1.0 Voltage
Congure the chipset voltage (1.0V).
VCCIO Voltage
Congure the voltage for the VCCIO.
VCCSA Voltage
Congure the voltage for the VCCSA.
VCC PLL Voltage
Congure the chipset voltage (1.50V).