Need help?Do you have a question about the ASROCK Z270 SUPERCARRIER and is the answer not in the manual?
General| ECC | Yes |
|---|---|
| Memory channels | Dual-channel |
| Memory slots type | DIMM |
| Number of memory slots | 4 |
| Supported memory types | DDR4-SDRAM |
| Maximum internal memory | 64 GB |
| Supported memory clock speeds | 2133, 2400, 2800, 2933, 3200, 3600, 3733 MHz |
| Processor socket | LGA 1151 (Socket H4) |
| Processor manufacturer | Intel |
| Compatible processor series | Intel Celeron, Intel Pentium |
| Intel® Core i3/i5/i7/i9 series | i3-6xxx, i3-7xxx, i5-6xxx, i5-7xxx, i7-6xxx, i7-7xxx |
| Number of SATA II connectors | 0 |
| Number of SATA III connectors | 10 |
| Number of SATA Express connectors | 2 |
| Number of M.2 (M) slots | 3 |
| PCI Express x1 (Gen 3.x) slots | 1 |
| RAID levels | 0, 1, 5, 10 |
| Supported storage drive interfaces | SATA III |
| DisplayPort version | 1.2 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| LAN controller | Intel® I219-V |
| Wi-Fi standards | 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Bluetooth version | 4.0 |
| Ethernet interface type | Gigabit Ethernet |
| Audio chip | Realtek ALC1220 |
| Certification | FCC, CE, WHQL, ErP/EuP ready |
| Component for | - |
| Motherboard chipset | Intel® Z270 |
| Audio output channels | 7.1 channels |
| Motherboard form factor | ATX |
| DirectX version | 12.0 |
| Maximum graphics card memory | 1024 MB |
| BIOS type | UEFI AMI |
| ACPI version | 6.0 |
| BIOS memory size | 32 Mbit |
| Cables included | SATA |
Weight and Dimensions| Depth | 244 mm |
|---|---|
| Width | 305 mm |
Specifies supported CPU generations, socket type, power design, and features.
Details memory technology, slots, supported speeds, capacity, and XMP support.
Lists available PCI Express slots and their configurations for graphics cards.
Details integrated graphics capabilities, supported resolutions, and output options.
Lists all external ports and connectors available on the rear of the motherboard.
Lists various internal connectors like fan headers, power connectors, and USB headers.
Details SATA, SATA Express, and Ultra M.2 socket specifications and supported technologies.
Details BIOS features such as AMI UEFI, multilingual GUI, and secure backup.
Important safety and handling precautions before installing motherboard components.
Shows slot configurations for single, dual, triple, and quad graphics cards.
Explains how to use the Clear CMOS jumper to reset BIOS settings.
Step-by-step guide for installing two SLI-ready graphics cards.
Step-by-step guide for installing two CrossFireX-ready graphics cards.
Step-by-step instructions for installing an M.2 SSD module.
Overview of A-Tuning sections: Operation Mode, OC Tweaker, etc.
Section within A-Tuning for overclocking configurations.
Section within A-Tuning for configuring fan speeds based on temperature.
Option to increase system performance by enabling advanced turbo features.
Loads pre-defined optimized CPU and GPU overclocking settings.
Settings for CPU cores, C-states, thermal throttling, and virtualization.
Configures CPU Vcore, GT, and DRAM voltages.
Adjusts CPU speed by modifying CPU Ratio and Base Clock frequency.
Settings for DRAM frequency, timing parameters, and voltage.
Settings for active cores, CPU C-states, and Halt State (C1E).
Selects primary graphics adapter and configures DRAM settings.
Enables SATA controllers and selects between AHCI/RAID modes.
Enables Thunderbolt function and sets security level for ports.
Manages legacy USB support and PS/2 simulator for compatibility.
Enables or disables BIOS support for security devices.
Tools for adjusting RGB lighting and viewing system hardware.
Monitors and configures fan speeds and modes.
Sets or changes supervisor and user passwords.
Configures fast boot settings and boot priority options.
Options to save changes, discard changes, and exit UEFI Setup.
To Next Page
