29
English
Z690M-IT X/ax
Step 3
Before installing a M.2 (NGFF) SSD
module, please loosen the screws to
remove the M.2 heatsink.
*Please remove the protective lms
on the bottom side of the M.2
heatsink before you install a M.2
SSD module.
Step 4
Align and gently insert the M.2
(NGFF) SSD module into the M.2
slot. Please be aware that the M.2
(NGFF) SSD module only ts in
one orientation. Tighten the screws
that come with the package with a
screwdriver to secure the modules
into place.
Step 5
Tighten the screws with a
screwdriver to secure the M.2
heatsink into place. Please do not
overtighten the screws as this might
damage the M.2 heatsink.
A
A
20
o
2
1
1
2
2
1
To Next Page
Loading...
