5400LN Series Grade 1
Cylindrical Lever Lockset
Installation Instructions
7
80-9150-0056-010 04/24
Copyright © 2002, 2013, 2023, 2024, ASSA ABLOY ACCENTRA™ Access and Egress Hardware Group, Inc. All rights reserved. Reproduction
in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
1-855-557-5078 Ext. 2 • www.accentra-assaabloy.com
Dummy trim installation
Secure the Rose Support assembly to
the door using screws and washers
provided and install the rose scalp and
inside lever.
Finish care
This lockset is designed to provide the highest standard of product quality and performance. Care should be taken to ensure a long-lasting
finish. When cleaning is required use a soft,damp cloth. Using lacquer thinners, caustic soaps, abrasive cleaners or polishes could damage
the coating and result in tarnishing.
To remove inside handle of
5417LN and 5418LN functions
(removable core cylinder)
1. Remove set screw.
2. Slide handle off.
Do not over tighten set screw
when assembling.
5428LN, 5429LN and
5439LN Functions
Only Adjust for Door
Thickness
Inside Lever
Rose Scalp
Inside Rose Support
Assembly
Washers
Machine Screws
Set Screw Holds In-
side Handle Double
Cylinder Function
Rotate 20°
Clockwise to
Remove Core
Control Key Only
Required to
Remove Cylinder
To Next Page
Loading...
