Use this end of Template for
Beveled Edge Doors
Use this end of Template
for Square Edge Doors
Square Edge
Door Only
2-3/4"
(70)
2-3/4"
(70)
Beveled Edge
Door Only
Place Solid Fold Line
on High Edge of Door
Place Dotted Fold Line
on Low Edge of Door
CAUTION: IF PRINTED FROM WEBSITE, PRINT 1:1 SCALE.
TO CHECK, MEASURE SCALE ACROSS.
BACKSET
BACKSET
Mark Center of
Door thickness for 7/8"
or 1" Dia . Hole.
Mark Center of
Door thickness for 7/8"
or 1" Dia . Hole.
5/32" x 1/8"
(4mm x 3mm)
Deep 2 places.
Both sides of door.
2-3/4" (69.9)
Between Centers
2-1/8" Dia.
(54mm)
Thru Door
5/16" Dia.
(8mm)
Thru Door
2 Holes
5400LN Cylindrical Lever Lockset
5"
4"
3"
2"
1"
1"2"3"
5400LN Series Grade 1
Cylindrical Lever Lockset
Installation Instructions
8
1-855-557-5078 Ext. 2 • www.accentra-assaabloy.com
Copyright © 2002, 2013, 2023, 2024, ASSA ABLOY ACCENTRA™ Access and Egress Hardware Group, Inc. All rights reserved. Reproduction
in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
80-9150-0056-010 04/24
To Next Page
Loading...
