Assa Abloy CLIQ eCLIQ Connect key - Position Sensor; eCLIQ Connect Key Position Sensor

20
EN
Position sensor
eCLIQ
®
Connect key
The eCLIQ
®
Connect key has a position sensor that functions as a switch
which can be used to switch on the wireless interface as needed.
This offers the following advantages:
· As a wireless key, the key is usually not visible for the environment and
· energy consumption is significantly reduced.
I
Note!
Securely switch off the wireless key: The key must be switched off in
areas where Bluetooth
®
and Wi-Fi
®
are not permitted.
· Remove the battery to switch off the key.
BlueBluetooth pairing after removal of the battery: The Bluetooth
pairing is initiated when the battery is removed.
· After inserting the battery, carry out Bluetooth pairing
(“Bluetooth interface”, page21).
Position sensor