Assa Abloy CLIQ eCLIQ Connect key - Product Signalling and Indicators

25
EN
Signalling
The key sends signals as soon as it is inserted in the cylinder.
Comment Signalling
Acoustic Optical
Normal mode – –
Batter
y is almost empty.
Replacing the battery
3 x long 3 x long green
Locking authorisation OK 1 x short 1 x short green
No locking authorisation 3 x short 3 x short red
No locking authorisa-
tion, because the key is
currently outside of the
time zone
3 x short 3 x short
red – green – red
Bluetooth interface is
activated
– 1 x short green
I
Note!
BlueBluetooth pairing after removal of the battery: The Bluetooth
pairing is initiated when the battery is removed.
· After inserting the battery, carry out Bluetooth pairing
(“Bluetooth interface”, page21).
Signalling