Assa Abloy ENTR - Fingerprint Reader

27
ENTR™ User Manual
Select the where you will be
the Fingerprint Reader.
• the Fingerprint Reader baseplate
to the wall.
• Use 4 screws and screw anchors or
double-sided adhesive tape to secure the
device to the baseplate.
1. Release the lid screw and open the lid.
2. Insert (2xAA) according to the
"+" "-" signs. Green LED will illuminate
for 2 seconds
3. Close the lid and the screw.
4. Touch [#] for 5 seconds.
6. Fingerprint Reader
The reader will self calibrate, which will be followed
by a series of beeps and blinking LEDs.
DEVICE
DATE/TIME
--/--
hh:mm
39
6
12
1
2
4
57
8
10
11
Enter Time
Press [OK]
Enter Date
Press [OK]
--/--/--
DD/MM/YY
15/03/15
11:00
39
6
12
1
2
4
57
8
10
11
Press [OK]
6.3 Adjust Date & Time