Norton® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company.
Copyright © 2010, 2013 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
ASSA ABLOY
80-9357-0001-020 (09-13)
Radio Frequency Function Option
1
2
3
4
1
2
3
4
Optional Door 2
1
2
3
4
1
2
3
4
Door 1
ORANGE
BLACK
BROWN/WHITE
RED
RF
RECEIVER
BOARD
(PART OF
OPERATOR
UNIT)
WIRING FOR
MOMENTARY
HOLD OPEN
FUNCTION
Notes:
1. Power input to Door Operator Unit is at
“T1” Power Input Terminal (not shown)
120VAC 60Hz.
2. Radio Frequency Feature can be
purchased as a separate kit.
Fail Secure / Fail Safe Electric Strike Wiring
120VAC
Supplied by
Others
-
+
DC or AC
Output
AC or DC
Electric Str
ik
e
+
-
Wall Switch, Card
Reader, Key Switch,
etc.
Normally Open Momentary
dry contacts
Notes:
1. Power input to Door Operator Unit is at “T1” Power
Input Terminal (not shown) 120VAC 60Hz.
2. Unit’s Relay Rating for strike interface: 30VDC @ 1A
or 125VAC @ .5A
Operation:
Door is normally closed and latched.
Activating switch will unlock the electric strike and the door will
automatically open. Door will close after hold open time delay
has elapsed.
For Fail Secure Strike - The door will remain locked during
power failure.
For Fail Safe Strike - The door will remain unlocked during
power failure.
1
2
3
4
1
2
3
4
JMP503
NC
NO
Jumper Settings
Place jumper to upper position
for normally closed operation
or to lower position for
normally open operation.
Operation:
Door is normally closed.
Activating wireless switch or hand held wireless
transmitter will open the door.
Door will close after hold open delay elapses.
120
VAC
Ground
COM
HOT
L N
(AC)
-V +V
ADJ
+
Optional 1.1A 24V Power Supply
Page 10
To Next Page
Loading...
