Copyright © 2010, 2014 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
ASSA ABLOY
80-9359-0001-020 (01-14) Rev 3
7
Operation Set-Up
1. Close the door.
2. Set the potentiometer SPTE to 0°.
4. Switch the electrical power to ON position (the operator will find its closed position).
5. Open the door to required position by slowly turning the potentiometer SPTE on the
main control unit, clockwise.
0°
SPTE
0°
SPTE
3. Loosen the door stop arm and remove.
a
d
b
c
a.Door stop arm
b.Fixing screw
c.Stop block
d.Fine-adjustment screw
NOTE: Absolute maximum opening is
110°; door stop is required to prevent
damage to door hardware or adjacent
walls.
BANG
To Next Page
Loading...
