Assa Abloy Norton 6000 Series - Wave to Open

80-9360-1043-020 Rev 1 05/21
Copyright © 2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
19
6000 Series Wiring Diagrams
Wave to Open
(change factory pre-wiring to illustration below - move NO to +24 on controller)
Power
+
N/C
C
N/O
Power -
1 Sec 5 Sec 10 Sec 15 Sec 20 Sec 25 Sec 30 Sec 35 Sec
LED Setting:
Time Delay Setting:
Jumper in place: LED is
Red and ashes Green
when relay is active.
No Jumper: LED is
Green and ashes Red
when relay is active.
Wave to Open Switch Detail
Wave to Open
Alternate 24V
Source (+V and -V
of Power Supply)