Assa Abloy Norton 7200 Series - Prepare Frame; Closer Mounting

Copyright © 2010, 2014 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
ASSA ABLOY
80-9372-0100-020 (02-14)
7
Track Mount (Pull Side)
Closer Mounting
2
Prepare Frame
Left Hand Door - LH
Right Hand Reverse - RHR
RH - Right Hand Door
LHR - Left Hand Reverse
Ceiling Line
2
(51)
4
(102)
Min
Min
 Right hand door shown, left
hand opposite.
 All dimensions shown in
inches (mm).
Install two screws in
the key slot locations
leaving 1/8" gap
between screw head
and frame as shown
(a).
a
C
1/8"
1
Track Mount Unit
6
(152.4)
19-1/8
(485.8)
C
Hinge or Pivot
3-1/4
(82.6)
3/4
(19)
For Concealed
Wiring Only
7/8
(22.2)
DIA THRU
1-3/8
(34.9)
1-1/16
(27)
23
14-1/2
(368.3)
(584.2)
Prepare holes for mounting per instructions on page 2. *Track screws are
self tapping and are smaller than closer mounting screws*
1-1/4 (31.8)
Standard Arm
Double Egress Arm
Series
Dim "A"
5/8 (15.9)
1/8 gap
(3.2)
Top of
Door
Frame
Soffit
A
(44.5)
1-3/4
7/8
(22.2)
*9/64 (3.6) Holes
for track screws*