Assa Abloy NORTON RIXSON 5200 Series - RF Wiring Diagram

80-9352-0022-020 Rev 2 06/23
Copyright © 2023, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
Technical Product Support:
Monroe, NC 28112 USA
Phone: 877.974.2255 ext: 2
Techsupport.NortonRixson@assaabloy.com
NortonRixson.com
RF Wiring Diagram
To install RF receiver:
1. Position supplied hook
and loop fastener onto
back of receiver. Remove
protective film.
2. Press receiver onto inside
of end cap with green wire
toward conduit hole.
3. Wire as shown above.