Assa Abloy SARGENT 1431 Series - Top Jamb Installation Overview; Spring Adjustment

6
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission
of Sargent Manufacturing Company is prohibited.
A7140F
LEFT HAND DOOR ILLUSTRATED
SAME DIMENSIONS APPLY FOR RIGHT HAND
DOOR MEASURE FROM HINGE C
L
INSTALLATION
INSTRUCTIONS
CLOSER MOUNTED ON FRAME
ABOVE STOP SIDE OF A DOOR
TOP JAM APPLICATION
#2 x 1-1/2" WOOD SCREWS
OR #12-24 x 5/8" FLAT
HEAD MACHINE SCREWS
TOP OF DOOR
2-1/4"
DOOR CLOSER
5/8"
1"
11-1/8"
CLOSER FOOT
APPLIED TO
DOOR
3-3/8"
C OF HINGE PIVOT
DIM "A"
2-1/2"
L
2-9/16"
DEPTH OF REVEAL
C OF CLOSER
MOUNTING
SCREWS
L
2"
DOOR
SPRING POWER
ADJUSTING NUT
DECREASE
POWER
INCREASE
POWER
–
+
FOR EXTERIOR DOORS AND WHERE STRONG DRAFT EXISTS INCREASE SPRING POWER AS NEEDED BY TURNING SPRING
ADJUSTING NUT CLOCKWISE. IF NECESSARY, DECREASE SPRING POWER TO MEET REQUIREMENTS BY TURNING SPRING
ADJUSTING NUT COUNTER CLOCKWISE.
* FOR EXTERIOR DOORS USE 1430 CLOSERS ONLY.
** CLOSERS ARE FACTORY SET FOR INTERIOR DOORS.
CW-CLOCKWISE CCW-COUNTER CLOCKWISE
SPRING ADJUSTMENT
ADJUST SPRING POWER ACCORDING TO CHART.
NUMBER OF TURNS OF SPRING POWER ADJUSTING NUT*
USE CHART AS GUIDE ONLY.
FACTORY**
SET
4-7 CW
7-10 CW
DOOR
WIDTH
(INCHES)
APPROXIMATE
DOOR WEIGHT
(POUNDS)
1430 DOOR
CLOSERS
24
30
32
36
40
42
44
46
48
OVER 48
80
110
115
130
150
155
165
170
180
1-3 CCW
FACTORY**
SET
1-3 CW
4-7 CW
7-10 CW
1431*
DOOR
CLOSERS
HINGE SIDE HINGE SIDE
STOP SIDE STOP SIDE
THIS IS A LEFT HAND DOOR THIS IS A RIGHT HAND DOOR
CLOSERS ARE NON-HANDED
ARM ASSEMBLY
TYPE
REVEAL DEPTH DIM. A MAX DOOR
OPENING
RANGE OF HOLD
OPEN
“H” ARM 0" TO 2" 5-3/4" 180° 80° - 180°
“HZ” ARM 2-1/8" TO 5" 6-1/2" 140° 80° - 140°
“HZA” ARM 5-1/8" TO 8" 7-1/4" 140° 80° - 130°