Assa Abloy Sargent ELR Series - Inside Mounting Plate and Wire Connections (Non-ELR); Mounting Plate Attachment Procedure; Wire Connections for Non-ELR

05/31/20
A8239B • 800-810-WIRE (9473) • www.sargentlock.com
15
Copyright © 2020, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
SE LP10 7000 Series Multi Point Lock
Inside of Door
6A Inside Mounting Plate and Wire Connections (Non-ELR)
1. Attach mounting plate using (2) #8 x 1/2” self-drilingl screws (Fig. 6A).
2. Connect 6- and 2-pin connectors from device to 6- and 2-pin connectors on reader
harness (Fig. 6B, C).
3. Connect ElectroLynx 4- and 8-pin connectors from the door harness to (black) 4- and 8-pin
connectors of the SE LP10 harness (Fig. 6D).
NOTE: Neatly fold excess wires into remaining space to prevent pinching
wires when mounting inside escutcheon (Fig. 6E).
Fig. 6D
SE LP10
Harness
8-pin
ElectroLynx
4-pin
ElectroLynx
Fig. 6C
Fig. 6B
Fig. 6E
Inside of Door
Fig. 6A