1-800-810-WIRE • www.sargentlock.com • A8205B 22
Copyright © 2018, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
01/31/18
IN220 Exit Device
12
Inside Cover Installation
1. Assemble cover by hooking top edge on inside mounting plate.
2. Carefully press bottom of cover toward door without pinching wires.
3. Secure the cover with the security allen wrench.
Inside
Cover
Inside of Door
Security
Allen Screw
Fig. 12
To Next Page
Loading...
