8 Arm systems
8.1 Pushing installation with PUSH-arm
This arm system is delivered with drive arm, telescopic part and door fitting. It is used if the oper-
ator is installed on the wall on the opposite side of the door swing, and approved for fire door ap-
plication.
Art. No.:1007241BK/SI
Frame depth
High PerformanceLE PerformanceExtension
8 1/4”(210 mm)
2 3/8”(60 mm)
3 3/4”(95 mm)
7 5/8”(194 mm)
345 mm extension
Art. No.: 173005BK/SI
230 mm extension
Art. No.: 173004BK/SI
Joint part
Art. No.: 173191
A = revealA = reveal
0-100 mm0-115 mmNone (Standard arm)
100-215 mm115-250 mmTelescopic part L= 345 mm
215-305 mm250-305 mmExtension L= 230 mm + joint part
360-720° spring tension
For IBC Egress door with 22N manual opening
force, use 180° spring tension
Recommended spring tension
1009728-en-9.0Issue 2021-02-2424
8 Arm systems
To Next Page
Loading...
