Assa Abloy SW200 - Pulling Installation with PULL-Arm

8.2 Pulling installation with PULL-arm
This arm system is delivered with drive arm, guide shoe and door fitting.
PULL, Art. No.: 1008401BK/SI (A = -20-130 mm, B = 95/210 mm)
PULL-220, Art. No.: 1011998BK/SI (A = -20-65 mm, B = 95 mm), only for LE Performance
PULL-600, Art. No.: 1014729BK/SI (A = -20-230 mm, B = 250/420 mm), only for High Performance
A
High PerformanceLE Performance
8 1/4” (210 mm)
B
3 3/4” (95 mm)
B = 95 mm
25Issue 2021-02-241009728-en-9.0
8 Arm systems