8.3 Pulling installation with PA S-arm
This arm system consists of main arm, slide track, roller guide and shaft adaptor. It can be fitted on
combinations of doors and jambs (walls), where the total reveal from the wall line to the door leaf
does not exceed 130 mm.
Art. No.: 1007476BK/SI (DIN-R)
Art. No.: 1007247BK/SI (DIN-L)
8.4 20 mm extension
Extension 20 mm for PULL/PAS and lower mounting of slide track profile.
Art. No.: 1011205
1009728-en-9.0Issue 2021-02-2426
8 Arm systems
To Next Page
Loading...
