V9.7 01/05/20 UD0011 Page 120 of 177
This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT"
To enrol 1 or 2 fingers, use the up/down buttons to select the required number of fingers to enrol and press the Enrol
button.
Simply follow the on screen instructions. The system will prompt the user to place each finder to be enrolled on the
reader 3 times.
Place finger Capture Ok Remove finger
When placing a finger, if the finger is not located correctly on the reader the following icons will be displayed:
Press Harder
Move Finger Up
Move Finger Down
Move Finger Right
Move Finger Left
When complete, the screen will display how many fingers are enrolled for the user, 1 or 2. To cancel the Enrol
process, click the central Cancel button. Once the Enrolment is complete click Save.
NOTE: The template will not be written to or cleared from the reader until Save is clicked.
NOTE: When enrolling the first administrator, please ensure you enter a Keypad ID or Card ID. This is
essential so that they can still access the system in case of reader issues. You will not be able to save the
user record unless this is supplied. If you have the system configured as ‘Keypad Only’, there is no restriction
on the Keypad ID length and so for added security you could for example enter a 6 or 10 digit PIN.
To Next Page
Loading...
