V9.7 01/05/20 UD0011 Page 139 of 177
This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT"
If the system to be configured is a locker, the ‘Custom’ option will be made available from the Product Type drop down
menu. The custom product type is a product type that should be used when there is no system image available for the
locker. When using the custom product type the user will be required to manually enter a number into the ‘Positions’
field for this system. The maximum value that can be entered will be 150.
NOTE: The maximum value that can be entered within the ‘Positions’ field is 150. If this value is exceeded,
an icon will appear in the left hand box. Hovering the mouse cursor over the icon will display a message
informing the user of this.
NOTE: If ‘Custom’ has been selected, the ‘System Viewer Grid’ must be used with that particular system.
The tick box to select the ‘Use System Viewer Grid Display’ will be ticked and greyed out and the Product
Builder will also be disabled.
With the ‘Custom’ option enabled, a generic image will be displayed in place of the usual system image to indicate that
this system is a custom type and that no image is currently available.
To Next Page
Loading...
