V9.7 01/05/20 UD0011 Page 141 of 177
This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT"
Random Return to Single System
For a Random Return to Single System, each physical position in the system will be represented by a row in the
System Viewer Grid. A row will also be displayed for each iFob that is not in the system.
When an iFob is removed from the system, its position will remain but its icon will turn grey to show that the iFob is
not in the system. A new row will then be added to the bottom of the grid to show which particular iFob has been
removed. It’s Index, Description and Status will also be displayed. This is shown in the example below.
The iFobs in position 6 and 7 have been removed from the system. Two new rows are created at the bottom of the
grid reflecting their current status.
To Next Page
Loading...
