V9.7 01/05/20 UD0011 Page 18 of 177
This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT"
5.4 USB MEMORY STICKS
NOTE: USB memory sticks should be formatted to FAT32 and not NTFS when used in a Traka Touch system,
as NTFS is not supported by the Windows CE operating system used.
NOTE: Files should be located on the root of the USB memory stick and not in sub folders. This is to ensure
that the Traka Touch software is able to locate them.
NOTE: If the USB memory stick has any metal attachments, remove them or reposition them to prevent
them making contact with any metalwork on the system and risking a short circuit.
The type of system will determine which USB port will be used. For Traka Touch Key Cabinets with doors, the USB port
will be located behind the door. Some Locker systems and Rack Management systems will require access to the Touch
PCB located behind the control panel door using a master key.
If you require further assistance, please contact Traka Technical Support using the information at the end of this
document.
To Next Page
Loading...
