V9.7 01/05/20 UD0011 Page 54 of 177
This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT"
10.7 ATTACHING KEYS TO IFOBS
Traka can provide you with standard key rings to allow you to attach your keys to your iFobs. Alternatively, Traka can
also provide security seals to securely lock the keys and iFobs together.
10.7.1 KEYRINGS
1. Carefully pry the key ring open
2. Slot your key(s) onto the key ring
3. Slot your iFob on the key ring
10.7.2 SECURITY SEALS
1. Cut the provided nylon tube to a length of 90mm (3
9/16th
inch) and thread over the cable. This is important to
ensure a long life from the cable seal and to prevent a long free end of cable showing.
2. Insert the cable through the Traka iFob and your key(s).
3. If you have Traka ID tags, add one of these as well.
4. Once assembled, push the free end of the cable into the hole in the locking body and ensure it is securely fixed.
After inserting as far as possible, pull on the cable to ensure that it is permanently secured inside the locking
body.
To Next Page
Loading...
