V9.7 01/05/20 UD0011 Page 80 of 177
This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT"
12.7 NETWORK ADMINISTRATION
This section is only applicable if you wish to connect your Traka Touch system to TrakaWEB.
Please ensure TrakaWEB has been installed and configured before continuing. Please read the latest revision of UD0016
– TrakaWEB Installation for more information.
NOTE: This action can only be performed by an Admin user.
1. Access the system and click the Admin button.
2. Click the Network button.
3. To enable communications with TrakaWEB simply select the red line button and ensure the symbol changes to
a green tick.
4. To save changes click Save. To view/change other settings please click the NIC button.
To Next Page
Loading...
