V9.7 01/05/20 UD0011 Page 82 of 177
This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT"
The next screen will display the certificate ‘Root Store’.
For more information about changing certificates in Traka Touch, please refer to TD0179 – Changing Certificates in
TrakaWEB & Traka Touch.
NIC (Network Interface Controller) Settings
Selecting the NIC button will take you to the Network Interface Controller settings. From here, you can view and change
your IP address, subnet mask, gateway, DNS etc. To change settings simply highlight the information you wish to change
e.g. IP address, and then use the keypad to delete and retype a new IP.
DHCP (Dynamic Host Configuration Protocol)
The DHCP option in the list will automate the IP address configuration without the use of a network administrator. Click
on the drop down menu to toggle the option between on and off.
Renew DHCP
Selecting Renew DHCP will present you with a screen asking whether you wish to renew your DHCP settings. Select Yes
if you wish to renew your settings, select No to return to the Network Administration page.
To Next Page
Loading...
