V9.7 01/05/20 UD0011 Page 89 of 177
This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT"
12.10 READER ADMINISTRATION
The Reader Administration Section allows you to define the system default settings for every user’s PIN.
NOTE: Accessing the General Options must be carried out by an administrator.
1. Access the system and click the Admin button.
2. Click the Reader button.
Force User Details to Require PIN
Select this to force every user in the database to use a PIN. This will mean every time a user is created, they
cannot be saved unless a PIN is entered into the user details.
Minimum PIN Length
Using the arrow keys, select the desired length of the users PIN. The minimum number of digits this can be set
to is four, the maximum length is 100.
PIN will expire after XX days
Using the arrow keys, select the desired amount of time you wish before the users PIN will expire. This can be
set in increments of 1 day with the maximum amount of days being 365 days. You can also select the option ‘PIN
will Never Expire’.
3. Once you have selected the desired options, click the Save button.
To Next Page
Loading...
