V9.7 01/05/20 UD0011 Page 94 of 177
This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT"
12.12.3 CHANGING THE DEFAULT LANGUAGE OF THE SYSTEM
NOTE: This action can only be performed by an Admin user.
1. Access the system.
2. Click the Admin button.
3. Click the General button.
4. From here, you can select the default language for the system. To change the language, simply use the
dropdown menu to navigate to the desired language.
NOTE: By default, the Traka Touch system language is set to English.
5. Once you have selected the desired language, click Save.
6. Click Exit and you will be taken back to the Admin screen. From there, click Exit again to return to the login
screen.
To Next Page
Loading...
