73
Secure Mode
Now the door is securely locked both from inside and outside.
The lock can only be opened with registered user code or keytag
from outside or with remote control from both inside and outside.
Note that if you have code blocking activated you can’t unlock with
any code in secure mode. When the door is opened, secure mode
is deactivated.
Use the following steps to lock the door in secure mode:
• Open the door
• Push down the button on foreend of the lock
• Close the door
• Lock the door with key tag. (If the key tag was registered with PIN
code you have to enter the PIN also and finish locking by pressing *).
To Next Page
Loading...
