Associated Research SC6540 Quick Start Guide

15
CONNECTIONS
OPERATING THE SC6540 WITH LINECHEK 620L (Continued)
OPERATION
Within the Line Leakage Edit screen on the 620L, the “Scanner Select”
parameter (soft key) will automatically appear when the highlighted cursor
moves to the Scanner Setup area using the Up and Down Arrow keys or Enter
key. Press the “Scanner Select” soft key to toggle the Scanner channel between
H (high), L (low), or O (off). Press the Left and Right Arrow keys to move the
highlighted cursor to the corresponding Scanner channel. Setting a channel
to H will connect the Probe-HI of the 620L to the corresponding Scanner
channel. Setting a channel to L will connect the Probe-LO of the 620L to the
corresponding Scanner channel.
The operator may set the Scanner on a test-by-test basis. For example, for test
step 01, the operator may set each of the Scanner channels in a particular
conguration. For test step 02, the operator may wish to change the conguration
of each Scanner channel.

Associated Research SC6540 Specifications

General

Brand	Associated Research
Model	SC6540
Category	Multiplexer
Language	English