IB-2003
eries 40 Trans
ite -
tationary
onveyor
7
Purpose
The purpose of this manual is
to help you get the best value
from your equipment. It can
do so by helping you decide
what work must be done, even
if you decide to have it done by
a dealer service department or
a repair shop. It also provides
information and procedures
for routine maintenance and
servicing.
Using the Manual
The manual is divided into
chapters which are further
divided into numbered sections,
headed in bold type between
horizontal lines. Each section
consists of consecutively
numbered paragraphs.
About This Manual
Procedures, once described
in the text, are not normally
repeated. When it is necessary
to refer to another chapter,
the reference will be given as
chapter and section number.
Cross references given without
the word “chapter” apply to
sections and/or paragraphs in
the same chapter, “see section
8” means in the same chapter.
Even though this manual
has been prepared with
extreme care, KPI-JCI cannot
accept responsibility for errors
in, or omissions from the
information given.
Special Notations
Within this manual procedures
or situations that require special
attention are indicated with the
words, DANGER,WARNING,
CAUTION and IMPORTANT.
DANGER, WARNING and
CAUTION are used to indicate
procedures or situations where
personal safety is involved.
IMPORTANT is used to
indicate special procedures
or situations which, if not
observed, could result in
damage to the equipment
or affect the operation of the
machine.
To Next Page
Loading...
Need help?
General
