710
KDS
Astec Mobile Screens Warranty C3 KDS 710
Standard Warranty
Astec Mobile Screens, Inc. (Manufacturer) warrants its products to its authorized Distributor, as specied herein, and
Distributor agrees to extend this same warranty (and no other) to each purchaser of the products of Manufacturer at the time
of sale and to notify each purchaser of the terms and conditions of this Warranty. Distributor is not authorized by Manufacturer
to make any other, different, or additional warranty on behalf of Manufacturer, and any such warranty given by Distributor is not
binding on Manufacturer. Distributor shall hold Manufacturer harmless from any loss and/or costs (including attorney’s fees)
arising from failure to observe this condition. Manufacturer extends this same Warranty to those, in addition to its authorized
distributors, who buy the PRODUCTS of Manufacturer directly from it rather than purchasing from an authorized Distributor.
Manufacturer warrants, commencing with the date of receipt of the goods by rst end-user and for a period of twelve (12)
months or 1000 hours, whichever comes rst, thereafter, all machinery and parts manufactured by Manufacturer to be free
from defects in workmanship and material. If, within such warranty period, any machinery or parts shall be proved to the
satisfaction of Manufacturer to be defective, it shall be replaced or, at the option of Manufacturer, repaired at its factory, F.O.B.
Sterling, Illinois, at no charge (providing the defective machinery or parts are returned to Astec Mobile Screens, Inc., Sterling,
Illinois, freight prepaid). At its option, Manufacturer may repair, or arrange to have repaired, any defective machinery or parts,
at the location of the Distributor, at the yard location or operating site of the rst end-user, or at any other suitable location at
no charge to rst end-user and at no charge to Distributor other than those specied in its Distributor s Agreement. The right
to have defective machinery or parts repaired or replaced shall constitute Distributor s and rst end-user s sole and exclusive
remedy. Manufacturer may, at its sole discretion, refund the purchase price or defective machinery or parts in lieu of repairing
or replacing them, providing the defective machinery or parts are returned to Astec Mobile Screens, Inc., at Sterling, Illinois,
freight prepaid, and providing such return is authorized by Manufacturer.
Manufacturer may, at its sole discretion, waive the requirement that defective machinery or parts be returned to its factory in
connection with a warranty claim. The obligation of Manufacturer under the terms of this Warranty is limited to the described
repair or replacement of defective machinery or parts. Labor for warranty repair will be paid under a formula determined by
Manufacturer.
With regard to machinery, parts or accessories which are furnished by Manufacturer, but not manufactured by it, the warranty
obligation of Manufacturer shall be limited to and the same as that of its supplier. No warranty shall apply to any used
machinery or parts. No warranty shall apply to the products of Manufacturer which, in its opinion, have been adversely affected
by the use, on or with its products, of parts, attachments, equipment or lubricants either manufactured, sold or authorized by
Manufacturer.
No warranty shall apply to machinery, parts or accessories which have been furnished, repaired or altered by others so as (in
the opinion of Manufacturer) to have affected the same adversely. No warranty shall apply to machinery, parts or accessories
which (in the opinion of Manufacturer) have been subject to accident, negligence, or improper operation, installation,
maintenance, storage, care or other-than-normal used during and after shipment. Manufacturer warrants that eld services
conducted by it in connection with installation or repair of machinery and parts will be performed in a good workmanlike
manner. The obligation and liability of manufacturer in connection with eld services shall be limited to a refund of the amount
it charged for such services, if any.
In as much as the work to be performed by the buyer or end-user with the machinery or parts furnished by
Manufacturer will vary according to the materials used, local conditions and the results required and that such variation will
continue throughout the use of such machinery or parts, it is not possible to (and Manufacturer does not) warrant or represent
that machinery and parts furnished by it will handle specic materials or will produce specic results from such materials.
Manufacturer’s liability hereunder is conditioned upon Distributor (or in the event of a direct sale to a rst end-user, then rst
end-user) giving notice in writing to Manufacturer of any alleged defect, and such notice must be given immediately upon
the discovery of such alleged defect; such notice must be received by Manufacturer not later than thirty (30) days after the
expiration of the warranty period.
Manufacturer does not warrant or represent that any machinery, parts or accessories furnished by it meet any Federal, State or
Local statutes, codes, ordinances, rules, standard or other regulations covering safety, pollution, electrical wiring and so forth.
THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED (EXCEPT THE
WARRANTY OF TITLE) INCLUDING BUT NOT LIMITED TO ANY WARRANTY OR MERCHANTIBILITY, MANUFACTURER
SHALL NOT BE SUBJECT TO ANY OTHER OBLIGATIONS OR LIABILITIES WHATSOEVER WITH RESPECT
TO MACHINERY, PARTS, ACCESSORIES OR SERVICES MANUFACTURED OR FURNISHED BY IT OR ANY
UNDERTAKINGS, ACTS OR OMISSIONS RELATING THERETO. UNDER NO CIRCUMSTANCES SHALL MANUFACTURER
BE LIABLE FOR ANY CONSEQUENTIAL OR OTHER DAMAGES, EXPENSES, LOSSES OR DELAYS HOWSOEVER
CAUSED.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION OF THE FACE HEREOF.
To Next Page
Loading...