710
KDS
Astec Mobile Screens Safety 5 KDS 710
FOLLOW SAFETY INSTRUCTIONS
Carefully read all safety messages in this manual and on your machine safety
signs. Keep safety signs in good condition. Replace missing or damaged safety
signs. Be sure new equipment components and repair parts include the current
safety signs. Replacement safety signs are available from your Astec Mobile
Screens Dealer.
Learn how to operate the machine and how to use controls properly. Do not let
anyone operate without instruction.
Keep your machine in proper working condition. Unauthorized modications to
the machine may impair the function and/or safety, affect machine life and/or void
the warranty.
If you do not understand any part of this manual and need assistance, contact
your Astec Mobile Screens Dealer.
REPLACE SAFETY SIGNS
Replace missing or damaged safety signs. See Appendix A for a detailed descrip-
tion of safety label placement. Contact your Astec Mobile Screens Dealer for
replacement safety decals.
PREVENT BYPASS STARTING
Avoid possible injury or death from engine run away. Do not start engine by
shorting across starter terminal. Start engine only from operator’s station.
HANDLE FUEL SAFELY – AVOID FIRES!
Handle fuel with care: it is highly ammable. Do not refuel the machine while
smoking or when near open ame or sparks.
Always stop engine before refueling machine. Fill fuel tank outdoors. Prevent
res by keeping machine clean of accumulated trash, grease, and debris. Always
clean up spilled fuel.
Read this manual before operating your equipment. The information presented will prepare
you to do a better and safer job. Keep this manual handy for ready reference. Require all
operators to read this manual carefully and become acquainted with all adjustment and
operating procedures before attempting to operate. Replacement manuals can be obtained
from your dealer.
To Next Page
Loading...