AstroAI 250 PSI User Manual

- 1 -
Thank you for purchasing the AstroAI 250 PSI Tire Inflator Gauge. Inflate tires without having to
continually check pressure and then adjust. We hope you enjoy your new Tire Inflator Gauge. If
you have any questions or concerns about your new product,
you are welcome to contact us with your question via support@astroai.com.
Inflator Gauge Diagram
1. Valve Controller
2. Air Bleed Valve/Reset Button
3. NPT Male End
4. NPT Threaded Female Connector
5. Interchangeable Brass Chucks
6. 18” Rubber Hose
7. Digital Gauge Display
8. Battery Compartment

AstroAI 250 PSI Specifications

Measurement Specifications

inflation range	0-250 PSI
accuracy	±1%
display resolution	0.1 PSI

Display

display type	Backlit LCD
measurement units	PSI, KPA, Bar, Kg/cm2
compatibility	NPT air compressor connector