PREPARATION
Fully charge the jump starter after receiving it.
l. Checking the battery level
Press the Power Button to check the battery level, then the battery
indicators will illuminate up:
Indicator
1 bar
2 bars
3 bars
4 bars
Battery level
Under
Between 25% and 50%
Between and
Between 75% and 100%
II. Charging the device
Note: The battery indicators will illuminate circularly while charging; the
illuminated indicators represent the current battery level. If all four of
the battery indicators are off, it means the charging is complete.
1. Connect the USB-A part of the USB charging cable to the power
source's output port.
-06
To Next Page
Loading...