i#stroAl
ASTRON SNOW BRUSH MANUAL
Thank you for purchasing the Snow Brush from
AstroAl. For optimal performance and safety, please
read and follow all of the instructions below before
use. Please keep this manual for future reference
We hope you enjoy your new Snow Brush! If you
experience the need for any kind of help or support
from our Customer Service team, you are welcome
to contact us with your question via
support@astroai com Thanks again!
WARNING
• Please read the instructions carefully before use
• Please keep this item in a dry place and free from
sunlight
• Please keep this item away from fire, corrosive
liquid and strong acid.
• Please do not pull brush hair to prevent it from
falling off.
• Please do not use this product outside of its
intended use
Accidents may happen through the shipping
process, please contact our support team If you
come across the following issues:
1 Connection breaks, unable to get the brush
and scraper assembled;
2. Unable to connect pieces together or if there
is a loose fit;
3. Brush hair falls off/ handle breaks off.
DIAGRAM
3
11
(j) Snow Brush
O Handle
O Hook Hole
45mm
6
685mm
@ Snow Brush Hair
@ Snow Scraper
O Press Button
11
PRODUCT FEATURES
Snow Brush:
Made of brand new high-strength ABS plastics and
PVC filament;
Snow Scraper:
Made of brand new high-strength ABS plastic. Hard
widening scraper and low temperature resistant
material provide more convenience and practicality
to scrape and sweep snow;
Handle Design:
Made of EVA cotton Soft, elastic and anti-
cracking material gives more comfort to hold;
Snow Brush Hair:
Made of PVC materials to prevent deformation, will
not freeze or harden under -400C; will not cause any
damage to glass or vehicle body panels;
Separating Design:
When the brush and scraper are disassembled,
they can function independently;
The joint buckle is made of integrated high strength
plastics, allowing more than ten thousand presses;
Not only available for cars, electro-cars,
motorcycles, and bicycles, also can be used to
clear snow from houses, doors and windows;
The item can be disassembled and stored in the
carrying case after the job is done
To Next Page
Need help?
General
