Need help?Do you have a question about the Astronergy CHSM54M-HC and is the answer not in the manual?
General| Module Type | Monocrystalline |
|---|---|
| Dimensions | 1722 x 1134 x 30 mm |
| Junction Box | IP68, 3 diodes |
| Connector Type | MC4 compatible |
| Model | CHSM54M-HC |
| Maximum Power Voltage (Vmp) | 41.6 V |
| Power Tolerance | 0 ~ +5W |
| Frame | Anodized aluminum alloy |
| Warranty | 12 years product warranty, 25 years linear power output warranty |
| Operating Temperature Range | -40°C to +85°C |
| Cable | 4mm² |
| Cell Configuration | 144 cells (6×24) |
Details instructions and safety precautions for PV module installation, connection, and maintenance by Chint Solar.
Disclaims liability for losses caused by improper installation, operation, or maintenance of PV modules.
Covers contacting local authorities, installation permits, and ensuring qualified electricians perform work.
Details safe practices during module operation, handling, and installation to prevent electrical hazards and damage.
Ensures safe transportation of PV modules in original packaging, protecting it from damage.
Step-by-step instructions for safely unpacking PV modules, emphasizing careful handling to prevent collisions.
Guidelines for stacking PV modules correctly, glass side down, on a horizontal surface to prevent damage.
Specifies suitable ambient temperatures, altitude limits, and environmental conditions for module installation.
Explains how tilt angle affects PV module output and recommends angles for optimal performance and self-cleaning.
Details the procedure for securely fastening PV modules using at least 4 bolts, including torque specifications.
Describes how to install PV modules using clamps on support frames, requiring a minimum of 4 clamps per module.
Details PV module electrical specifications like voltage, current, and power, including tolerances.
Ensures correct polarity, cable selection, secure connections, and system voltage matching for safe operation.
Explains the procedure for earthing the PV module frame using specific hardware for safety.
Recommends regular inspections for damages and factors affecting PV module functionality and safety.
Provides guidelines for cleaning PV modules to maintain optimal power production, recommending water and gentle cleaning.
To Next Page