Asus A31AD - Page 14

14 Chapter 1: Getting started
ENGLISH
ENGLISH
Rear panel
M12AD / M52AD / A31AD / F31AD / K31AD
Voltage selector. Use this switch to select the appropriate system input voltage
according to the voltage supply in your area. If the voltage supply in your area is
100-127V, set the switch to 115V. If the voltage supply in your area is 200-240V, set the
switch to 230V.
Setting the switch to 115V in a 230V environment or 230V in a 115V environment will seriously
damage the system!
Power connector. Plug the power cord to this connector.
Depending on local regulations, your Desktop PC has the following power ratings:
• M12AD/M52AD:
 •220-240Vac,3.0A,50Hz(China)
 •220-240Vac,3.0A,50Hz(Europe)
 •110-120Vac/220-240Vac,7.0A/4.0A,50Hz-60Hz(Taiwan)
 •110-120Vac/220-240Vac,6.0A/3.0A,50Hz-60Hz(NorthAmerica)
 •110-120Vac/220-240Vac,6.0A/3.0A,50Hz-60Hz;220-240Vac,3.0A,50Hz(AsiaPacic)