Asus A7N266 - Layout Contents

ASUS A7N266 User’s Manual 15
3. HARDWARE SETUP
3. HARDWARE SETUP
Layout Contents
3. H/W SETUP
3.2 Layout Contents
Motherboard Settings
1) PLED, WARNING p. 17 Onboard System Indicators
2) JEN p. 18 Jumperless Settings (Enable / Disable)
3) BSEL0, BSEL1 p. 18
CPU:DRAM Frequency Setting (100:100, 100:133, 133:100, 133:133)
4) VID1, 2, 3, 4 p. 19 Voltage Regulator Output Volt. Setting (1.675V-1.85 V)
5) VDDR p. 19 DDR Voltage Setting (2.7V, 2.6V, 2.5V)
6) BCS1, BCS2 p. 20 Bass / Center Setting (Center/Bass, Bass/Center)
7) LAN_EN p. 20 Onboard Network Setting (Enable / Disable) (optional)
8) AUD_EN p. 21 Onboard Network Setting (Enable / Disable) (optional)
9)
USB01 / USB23 / USB45PWR p. 21 USB Device Wake-up (+5V / +5VSB)
10) CLR_RTC p. 22 Clear RTC RAM (2 pin contact)
Expansion Slots/Sockets
1) DIMM 1/2/3 p. 23 System Memory Support
2) Socket 462 p. 26 CPU Support
3) PCI 1/2/3/4/5 p. 27 32-bit PCI Bus Expansion Slots
4) AGP Pro p. 29 Accelerated Graphics Port Slot
5) ACR Slot p. 30 Advanced Communication Riser Slot
Connectors
1) PS2KBMS p. 31 PS/2 Mouse Port (6 pin female)
2) PS2KBMS p. 31 PS/2 Keyboard Port (6 pin female)
3) USB p. 32 Universal Serial Bus Ports 1 & 2 (Two 4 pin female)
4) PRINTER p. 32 Parallel Port (25 pin female)
5) RJ-45 p. 32 Fast Ethernet Port Connector (9 pin male)
6) COM 1 / 2 p. 33 Serial Port / Header (9 pin male, 10-1 pin male)
7) VGA p. 33 VGA Port (15 pin female)
8) GAME_AUDIO p. 34 Game/MIDI Port (15 pin female) (optional)
9) AUDIO p. 34 Audio Connectors (Three 1/8”) (optional)
10) IDELED p. 35 IDE Activity LED (2 pin)
11) FLOPPY p. 35 Floppy Disk Drive Connector (34 pin)
12) PRIMARY / SEC. IDE p. 36 IDE Connectors (Two 40-1 pin)
13) CPU, NB, CHA_FAN p. 37 CPU, NB, and Chassis Fan Connectors (Three 3 pin)
14) USB_23 / USB_45 p. 37 USB Headers (10-1 pin)
15) IrDA p. 38 Infrared Connector (10-1 pin)
16) ATXPWR p. 39 Power Supply Connectors (20 pin block)