Disassembly procedure
2 - 7
2. Turn the non-removable screw 180 degrees counter-clockwise to loosen
the CPU. Squeeze the vacuum handling pump and use it to lift the CPU
away.
3. Don’t touch the die above the CPU.
4. Remove the CPU away.
5. Remove CPU thermal pad from CPU die with a pair of tweezers.
6. Remove 2 screws [M2 *3(L)] and disconnect the fan cable & DC-in cable
& Bluetooth cable, and then take the FAN module away.
Unlock
L
O
triangle
To Next Page
Loading...
