Asus A8N-SLI DLX - Page 93

ASUS A8N-SLI DeluxeASUS A8N-SLI Deluxe
ASUS A8N-SLI DeluxeASUS A8N-SLI Deluxe
ASUS A8N-SLI Deluxe
4-254-25
4-254-25
4-25
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select Sub-menu F10: Save and Exit
Select Menu
Item Specific Help
Phoenix-Award BIOS CMOS Setup Utility
Advanced
IDE Function SetupIDE Function Setup
IDE Function SetupIDE Function Setup
IDE Function Setup
This sub-menu contains IDE function-related items. Select an item then
press <Enter> to edit.
Onboard Device Configuration
OnChip IDE Channel0 [Enabled]
OnChip IDE Channel1 [Enabled]
IDE DMA transfer access [Enabled]
Serial Port 1, 2 [Enabled]
SATA DMA transfer [Enabled]
Serial Port 3, 4 [Enabled]
SATA2 DMA transfer [Enabled]
IDE Prefetch Mode [Enabled]
OnChip IDE Channel0 [Enabled]OnChip IDE Channel0 [Enabled]
OnChip IDE Channel0 [Enabled]OnChip IDE Channel0 [Enabled]
OnChip IDE Channel0 [Enabled]
Allows you to enable or disable the onchip IDE channel 0 controller .
Configuration options: [Disabled] [Enabled]
OnChip IDE Channel1 [Enabled]OnChip IDE Channel1 [Enabled]
OnChip IDE Channel1 [Enabled]OnChip IDE Channel1 [Enabled]
OnChip IDE Channel1 [Enabled]
Allows you to enable or disable the onchip IDE channel 1 controller .
Configuration options: [Disabled] [Enabled]
IDE DMA transfer access [Enabled]IDE DMA transfer access [Enabled]
IDE DMA transfer access [Enabled]IDE DMA transfer access [Enabled]
IDE DMA transfer access [Enabled]
Allows you to enable or disable the IDE DMA transfer access.
Configuration options: [Disabled] [Enabled]
Serial Port 1, 2 [Enabled]Serial Port 1, 2 [Enabled]
Serial Port 1, 2 [Enabled]Serial Port 1, 2 [Enabled]
Serial Port 1, 2 [Enabled]
Allows you to enable or disable the SATA 1 and 2 ports.
Configuration options: [Disabled] [Enabled]
SATA DMA access [Enabled]SATA DMA access [Enabled]
SATA DMA access [Enabled]SATA DMA access [Enabled]
SATA DMA access [Enabled]
Allows you to enable or disable the SATA DMA transfer access.
Configuration options: [Disabled] [Enabled]
Serial Port 3, 4 [Enabled]Serial Port 3, 4 [Enabled]
Serial Port 3, 4 [Enabled]Serial Port 3, 4 [Enabled]
Serial Port 3, 4 [Enabled]
Allows you to enable or disable the SATA 3 and 4 ports.
Configuration options: [Disabled] [Enabled]