1-24 Chapter 1: Product introduction
3. Serial ATA connectors (7-pin SATA1, SATA2)
These connectors support the thin Serial ATA cables for Serial ATA
hard disks. If you installed Serial ATA hard disks, you may create a
RAID 0, RAID 1, or JBOD conguration.
Install the Windows
®
2000 Service Pack 4 or the Windows
®
XP Service
Pack1 before using Serial ATA.
For detailed instructions on how to congure RAID 0, RAID1, and JBOD,
refer to the RAID manual in the support CD.
4. Speaker out connector (4-pin SPEAKER)
This connector is for the case-mounted speaker and allows you to
hear system beeps and warnings.