Asus AAEON UP Xtreme UP-WHL01 - Audio Rate Control

CEC Client Installation 49
CEC Client Installation Supplemental Appendix for UP Xtreme
5.1.16 Audio Rate Control
Command Feature: This feature allows the audio playback rate of a Source Device to
be controlled by another device, e.g. an Audio System.
The following messages are used for the Audio Rate Control Feature: <Set Audio
Rate>
OpCode
Value
Description
Parameters
Response
Supported
<Set Audio
Rate>
0x9A
Used to control
audio rate from
Source Device.
[Audio Rate]
Perform the
specified actions, or
return a<Feature
Abort> message.
Yes