Image 15: Installation Finished
DfuSe Installation will complete automatically. Click “Finish” once it is complete.
2.6 Installing dfu-util on Windows
This section details how to install dfu-util for programming the flash memory. It can be
used to program both the Device OS and application firmware, as well as save and
restore configurations. If you are using Windows, you can use Windows CLI Installer to
automatically install dfu-util and the CLI. Otherwise, follow the instructions below.
First, download dfu-util from the release site:
http://dfu-util.sourceforge.net/releases/dfu-util-0.9-win64.zip
Extract the files. For this installation you will only need:
• dfu-prefix.exe
• dfu-suffix.exe
• dfu-util-static.exe
First, rename dfu-util-static.exe to dfu-util.exe. Next, create a location to save the dfu-
util installation. The recommended location is C:\Program Files\dfu-util
To Next Page
Loading...
