4.2 Demo Application cec-client.exe
To send custom CEC commands from PC to TV through libCEC-AAEON adapter, you
will need to install the cec-client. This is an .exe file that is included in the libCEC and
Windows driver package. A new CEC-Client was made with libCEC-AAEON adapter
and compiled libCEC in which a new adapter was added (3.2.1 Compile libCEC)
4.2.1 CEC-Client
Cec-client is a test client/demo application, used to debug the device. To start the
demo application and check whether the device can be detected, execute the
command “cec-client.exe” in libcec\build\amd64 or run the installed application.
Image 20: Run CEC-Client
To Next Page
Loading...
